The existing home of 15 years has been a work in progress and served the purpose well for raising 3 young energetic boys and having many happy holidays for family and friends. The existing home is only small and my three boys are now over 6″ high and now just want to party. So more room is needed. All their friends can go down there and make as much noise as they like without disturbing us oldies. My recent project is to build a bunkhouse on the top of the garage to match in with the existing home in the 50’s theme.
So therefore the construction of the bunkhouse is in the same theme as the existing home which is fibro cladding on the outside with metal roof and traditional masonite on the inside.
A balcony, kitchen and bathroom etc has all been designed to fit in 80sq metres of elevated space, leaving garage available for a boat and Fred my 1978 Land Rover, whilst maintaining the backyard space for badminton. Access to the bunkhouse is via the staircase at the back fence. The floor height has been determined due to the existing rollerdoor drum. I’ve decided to lower the external deck to give an overall frame height of 2.1 meters. A low slung roof line, I believe, is a better look. The main beam over the deck is just above the outside dunny. There are four large beams that span the entire garage space. In between beams there are treated pine joists. The new framing timber I delivered from auctions over the christmas break laid on the grass for three weeks. When I started construction I discovered all my timber was infested by white ants which are ferocious in this area. I had to throw some out…anyway I hope the building inspector doesn’t see the rest.
A pair of French doors glazed in Kosciuszko glass, a traditional early Australian glass texture, which leads from the veranda into the bunkhouse. These doors were found in demo yard for $30. Bargain!! Timber windows to the rear of the house I constructed myself and glazed them using hammered textured glass. The kitchen double hung I got from the auctions, $30. The fixed high light for the bedroom I reconfigured an old window I have had lying around.
The front main window I am not sure of the size and configuration until I build so I will order later. I will have to remember it takes one month to order, the look from the front needs to be in proportion. You have to be careful as a small window on a large flat wall would look silly and in addition a large window will be too restrictive internally. I’m guessing the configuration will be two casements with Kosciuszko in the sashes and clear in the middle. Unfortunately my 1950’s pelmet I found at the tip wont fit, so I’ll think of something else?
Be back blogging soon. Work in progress!